CYP PUV-1082-PRO, Operation Manual

Page: 21 / 100

21
4-FACTORY DEFAULT
2ND LEVEL
3RD LEVEL
Factory Reset? Yes
NO
1) Factory Reset:
Selecting “Yes” will perform a factory reset and return
the unit to its factory default state. After the reset is complete, the unit
will reboot automatically.
5-FIRMWARE
2ND LEVEL
3RD LEVEL
1-Version [Displays current version]
2-Update Yes
NO
1) Version:
Displays the unit’s current firmware version.
2) Update: Provides a way to update the unit’s firmware. To begin the
firmware update process, select “Yes” followed by pressing the “Enter”
button. Next, insert a USB thumb drive, with a valid firmware file (*.bin
format) in the root directory, into the unit’s USB service port and the
update will begin automatically. The unit will automatically reboot to
complete the update process.
6-MISCELLANEOUS
2ND LEVEL
3RD LEVEL
1-IR Remote Channel 0 ~ 15
[0]
2-Discrete IR Address [Displays current status]
3-System Baud Rate [Displays current baud rate]
1) IR Remote Channel:
Select the IR remote channel that the unit will
accept signals on.
2) Discrete IR Address:
Displays the current discrete IR address state.
3) System Baud Rate:
Displays the unit’s current serial control baud rate.