CYP PUV-1082-PRO, Operation Manual

Page: 50 / 100

50
6.10 RS-232 and Telnet Commands
6.10.1 Command Syntax
The RS-232/Telnet command structure for this unit is both flexible and
powerful, and allows for multiple parameters to be set across multiple
ports simultaneously within a single command transmission. This section
will detail the command syntax used to send both simple (single port/
single parameter) commands as well as the more complex (multi-port/
parameter) commands.
The following multi-function syntax is specifically for use with these
commands: “ZoneLineOut”, “ExtLineOut”, “AudioCAT_Out”,
“HDMI_Out”, “HDBT_Out”, “MixerOut”, and “Pattern”. “ZoneAvPair” has a
special structure that will be explained separately. All other commands
must be sent within discrete transmissions.
1) Basic Command Format
Use this syntax to set or change a single parameter for a single input/
output port.
Command Format
<Command> {Port} {Parameter [= Value]}
Examples
ZoneLineOut B Treble= -12
HDBT_Out A Mute
2) Basic Command Format (ZoneAvPair)
The ZoneAvPair command requires multiple variables to define the
location of the slot’s value to adjust. This command only accepts
3 possible parameters: “VideoSrc”, “AudioSrc”, and “Load”. Use the
following syntax to set or change a single parameter for a single slot
assigned to an HDBaseT or HDMI output port.