CYP PUV-1082-PRO, Operation Manual

Page: 12 / 100

12
6.2 Rear Panel
IR OUT
HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN
IR OUT IR OUT IR OUT IR OUT IR OUT IR OUT IR OUT
HDMI IN
IR OUT
HDMI IN HDMI OUT HDMI OUT
IR OUT
POH 24V LAN RS-232
MAIN 24V
SERVICE
ALL
IR IN IR OUT
CAT5e/6 OUT CAT5e/6 OUT IR IN CAT5e/6 OUT IR IN CAT5e/6 OUT IR IN CAT5e/6 OUT IR IN CAT5e/6 OUT IR IN CAT5e/6 OUT IR IN IR IN CAT5e/6 OUT IR IN
1 2
3 4
V+
GND
GND GND
V+
DIGITAL CAT
OPT.
COAX.
I J 1 2 3 4 5 6 7 8 9 10
A B C D E F G H
ANALOG
L
R
EXTENDED
L
R
ZONE
L
R
L
R
L
R
B A D C
F E H G
AUDIO OU
T
2 1 4 3
AUDIO OU
T
2 1 4 3
A
UDIO IN
1 2
1 2
A
UDIO IN
A
UDIO I/O
1
2
1 3 12 13
4 5 6 7 8 9 10 11
2
1 HDMI IN & IR OUT 1~10 PORTS:
Connect up to 10 source devices to
the HDMI ports using appropriate quality HDMI cables. Input source
devices include Blu-ray players, set-top boxes, game systems and so
on. Attach IR blasters to the IR Out ports to transmit the IR signals
received from connected HDBaseT Receivers.
Note: IR signal routing follows the HDMI signal routing.
2 CAT5e/6 OUT & IR IN A~H PORTS:
Connect to compatible HDBaseT
Receivers with Cat.5e/6/7 cable for transmission of all data signals. In
order for an IR signal to be transmitted along with the HDMI signal an
IR extender must be connected to the associated IR In port. IR signals
coming back from the connected HDBaseT receiver can be used to
control the matrix remotely and will also be broadcast from IR blasters
connected to the appropriate IR Out/All IR outputs. 48V PoH will also
be supplied if the 2nd (POH 24V) power supply has been connected
to the unit.
Note: 4K signals with 10/12-bit HDR (High Dynamic Range) colour are
not supported by standard HDBaseT Receivers and will be automatically
converted to 8-bit colour. In order to properly extend these signals an
AVLC supporting HDBaseT Receiver must be used. 4K (4:4:4) sources will be
automatically scaled to 1080p if the connected display can't support 4K.
3 HDMI OUT I~J PORTS:
Connect up to 2 HDMI displays using these
HDMI output ports. These two HDMI ports can be either independent
high bandwidth (18Gbps) outputs, or they can be configured to
mirror two of the HDBaseT outputs for local monitoring or recording
purposes.
4 ZONE AUDIO OUT A~H PORTS:
Eight sets of stereo analogue audio
outputs. These audio ports are capable of independently outputting
audio routed from any audio source within the matrix. Audio mixing,