Page 16
cymatic audio
Live Recorder LR-
16
www.cymaticaudio.com
www.cymaticaudio.com
www.cymaticaudio.com
www.cymaticaudio.com
8.
16x2 Channel USB Interface Mode
When connected to your Mac®, iPad® or PC the
Live Recorder LR-16
becomes a 16 in / 2 out, 24 bit/96 kHz USB class
compliant audio interface.
PC / Windows
1.
1.
Minimum System Requirements
Operating Systems (32- or 64bit):
•
Windows® XP(SP2), Windows Vista, Windows 7, Windows 8
•
Microsoft .NET Framework 4.0 (usually installed
automatically by Windows update.)
→ for Windows versions where the .NET Framework 4.0 is
not already installed, the installation wizard will
automatically start when the mixer / control panel is started
for the first time. )
The LR-16 device drivers do not require the .NET Framework.
Hardware:
•
Pentium® IV 1.2 GHz or better
•
512 MB Ram ( 1GB or more recommended)
•
1 free USB2.0 compatible port on PC
NOTE
: The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will
greatly affect the overall performance of your recording system. A faster processor and more RAM can
reduce signal latency (delay) and improve overall performance.
2.
WDM and ASIO driver installation
Before connecting the Live
Recorder LR-16
to your PC please download the driver package from the
download section at the Cymatic Audio website:
http://www.cymaticaudio.com
After the download has finished unzip the downloaded archive to a folder on your PC. Double click the
setup.exe and follow the on-screen instructions. It is strongly recommended that you exit all other
programs before running the
LR-16
driver installation program.
Once the driver installation has finished please connect the
LR-16
to your PC by connecting the supplied
USB cable to the
LR-16
USB2.0 connector ❹ on the rear panel and a free USB2.0 port on your PC.
!
Make sure that there is no USB storage device connected to the USB storage
connector
❶
when using the
LR-16
as a USB audio interface.
