Page 22
cymatic audio
Live Recorder LR-
16
www.cymaticaudio.com
www.cymaticaudio.com
www.cymaticaudio.com
www.cymaticaudio.com
10.
Troubleshooting
General:
Always make sure that you have downloaded and installed the latest drivers and firmware for your Live
Recorder LR-16. Firmware and driver download available at http://www.cymaticaudio.com
Direct-to-USB recording mode / Wave player mode
1.
Problem
Possible Solutions
My recording has audio drop-outs even though the USB
storage device performance test was successfully
passed
1.
Check audio connections for lose contacts.
2.
Format the USB storage device using the LR-16
format function to optimize file system
3.
Set recording sample rate to 44.1kHz and / or
sample width to 16 bit.
My external USB2.0 hard-disk is not recognized by the
Live Recorder when plugged in, even though I can hear
that the disk is running.
1.
The hard disk uses more power than is allowed
by the USB standard for bus powered devices.
Try using the hard disk with a power supply.
16 Channel USB audio interface mode
2.
Problem
Possible Solution
PC: Device is not recognized by the PC after the LR-16
device drivers have been installed and the device is
plugged in using the supplied USB cable.
Make sure that there is no USB storage device
connected to the USB storage connector ❶ when using
the LR-16 as a USB audio interface.
