Page 15
cymatic audio
Live Recorder LR-
16
www.cymaticaudio.com
www.cymaticaudio.com
www.cymaticaudio.com
www.cymaticaudio.com
Connecting to Balanced Audio
If the source provides a symmetric output, it should handle a short from Ring to GND properly. The same setup as for a
mono source can be used.
In rare cases where the source cannot tolerate a shorted Ring to GND, a special cable (e.g. Hosa PXF105, a XLR-to-TS cable
that leaves XLR pin 3 open) and again a TS-to-TRS adapter at the LR16 inputs resolves the issue:
Tip = hot, Ring = cold, Sleeve = GND
2 = hot, 3 = cold, 1 = GND
TS-to-TRS Adapter
(ring not connected)
