Cyclades AlterPath BladeManager, User Manual

Page: 52 / 202

2: BladeManager Installation
2-28 AlterPath BladeManager Manual
• If the Wake on LAN feature switched on the BladeManager, the Wake on
LAN can switch off the BladeManager.
• You can switch off the BladeManager through a request from the service
processor.
Pre-Configuration Requirements
Before configuring BladeManager, ensure that you have the following system
set up and information ready:
Note: To complete the configuration process, SKIP to Chapter 4: Web
Administration and refer to the “First Time Configuration Wizard” on
page 4-4 .
Note:
C hapter 3: BladeManager Web Access is designed for regular users
who will use or operate the application after the BladeManager
administrator has completed the configuration procedures discussed in
chapter 4
.
Requirement Description
HyperTerminal, Kermit,
or Minicom If you are using a PC, ensure that
HyperTerminal is installed on your Windows
operating system. If you are using the UNIX
operating system, use Kermit or Minicom.
NOTE: You will need Root Access on your
local UNIX machine in order to use the serial
port.
IP Addresses Have the IP/Mask addresses of the following
ready:
- All Console Servers
- Gateway
- DNS
Optional addresses:
- NTP
- SMTP (only when using the alarms feature).
NIC Card Ensure that you have a NIC card installed in
your PC to provide an Ethernet port, and
allow network access.