manualshive.com logo in svg

Cyclades AlterPath BladeManager, User Manual

Share
Download
Cyclades AlterPath BladeManager User Manual Download Page 45

Installation Procedures

AlterPath BladeManager Manual

2-21

11. Tighten the captive screw on the rear of the server.

12. If you have other options to install, do so now.

13. Replace the cover. Go to 

Completing the Installation

, this chapter. 

Completing the Installation

To complete the installation, follow the steps below:

1. Re-install the cover.

2. Install the server in the rack cabinet. 

Attention:
Install your server only in a rack cabinet with perforated doors.
Do not leave open space above or below an installed server in your rack 
cabinet. To help prevent damage to server components, always install a 
filler panel to cover the open space and to help ensure proper air 
circulation. See the documentation that comes with your rack cabinet for 
more information. 

3. Connect the cables and power cords. See Connecting the Cables, this 

section. 

4. Update the server configuration. See Updating the Server Configuration, 

this section.

Summary of Contents for AlterPath BladeManager











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands