Cyclades AlterPath BladeManager User Manual Download Page 153

Page: 153 / 202

Security Profiles

AlterPath BladeManager Manual

4-71

Table 4-15:

Security Profiles, VLAN/Subnet - Fieldnames and Elements

Field Name

Function

LAN ITF (tab)

Tab title to select the current form.

Rule

The configured policy (Allow or Deny) that
applies to the current form and the entire
security profile. The default rule is configured
from the

General

tabbed form.

Select LAN ITF
Conditions

List box that lists all LAN interfaces. Select the
LAN interface(s) that will be applied to the rule.

Add

Button to select items from the

Select LAN

ITF Conditions

(left box) and add to the

Selected LAN ITF Conditions

list box (right

box).

Summary of Contents for AlterPath BladeManager











































































































































































































Search results

Summary of Contents for AlterPath BladeManager

Reviews:

Related manuals for AlterPath BladeManager

Brands by name

Popular brands

Cyclades AlterPath BladeManager, User Manual

Search results

Summary of Contents for AlterPath BladeManager

Reviews:

Related manuals for AlterPath BladeManager

Brands by name

Popular brands