manualshive.com logo in svg

Cyclades AlterPath BladeManager, User Manual

Share
Download
Cyclades AlterPath BladeManager User Manual Download Page 151

Security Profiles

AlterPath BladeManager Manual

4-69

The system displays the 

Source IP

 tabbed form:  

2. Complete or modify the form, as needed.   

Table 4-14: 

Security Profiles, Source IP - Fieldnames and Elements

Field Name

Function

Source IP (tab)

Title of the current tabbed form.

Rule

The configured policy (Allow or Deny) that 
applies to the entire security profile. The 
default rule is configured from the 

General

 

tabbed form.

Add Source IP 
Conditions

This section allows you to define the Source 
IP that will be used as the conditions for 
applying it to the rule. 

IP

The IP address to be added to the Added 
Source IP Conditions list box. 

Netmask

The netmask to be added to the Added Source 
IP Conditions list.

Summary of Contents for AlterPath BladeManager











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands