manualshive.com logo in svg

Cyclades AlterPath BladeManager, User Manual

Share
Download
Cyclades AlterPath BladeManager User Manual Download Page 101

Chassis Management

AlterPath BladeManager Manual

4-19

Chassis > Devices List Form

The 

Devices

 List form, the primary form of 

Chassis

, allows you to view a list 

of devices that are configured in the BladeManager. From this form, you can 
add a new device, or select the device to modify or delete. .

   

Table 4-3: 

Chassis (Devices) List - Fieldnames and Elements

Fieldname / Element

Definition

[

unlabeled checkbox

]

Checkbox to select the device to be deleted. 

Device

Device name. Click on the device name to 
connect to the console server or device. 
Click on the column title (Device) to change 
the sort order.

Type

The type of device (IBM Blade Center).

Config

The device configuration. Click on 

Edit

 to 

display the Device Detail form for selected 
device record or line.

Firmware

The firmware version for this device.

Summary of Contents for AlterPath BladeManager











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands