Assembly and Setup
Page 2–13
Cybex 750C/750R Owner’s Manual
WARNING: Be sure that all electrical requirements are met as indicated in the specifications at
the front of the manual and at the beginning of this chapter prior to proceeding.
Testing the Operation
Use the following instructions to test the full resistance of the unit.
1.
Plug the optional power cord into a power outlet from a grounded circuit as described under
Electrical Requirements
in this chapter.
NOTE:
Coil up the remainder of the power cord and place it
out of the way.
NOTE:
Cybex recommends that the unit be unplugged when not in use.
2.
Observe that the control panel will illuminate and be in the
Dormant Mode
when using the optional
power
adapter.
NOTE:
If not using the optional power adapter, the display will not illuminate until step 4.
3.
Hold the handrails to steady self while stepping into the pedals.
4.
Begin
pedaling.
5.
Press
the
Quick Start
key. The unit begins with a long tone.
6.
Run the unit through its full resistance range. First press the
Level +
key until the unit reaches its
highest load (the display will show “21”). Then press the
Level -
key until the unit reaches its
lowest load; the display will show “1”.
7.
Press
Pause/End
to end the workout review and return the display to
Dormant Mode
.
WARNING: Wait until all moving parts come to a complete stop before dismounting.
8.
Wait until pedals come to a complete stop before dismounting the unit. Hold the handrails to
steady self while stepping off the unit.
Summary of Contents for 750C
