CYBEX 750C, Owner'S Manual

Page: 11 / 84

Safety
Page 1-3
Cybex 750C/750R Owner’s Manual
Facility Safety Precautions
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is
performed.
Enforce all user and safety precautions. •
Read and understand the Owner’s Manual completely before assembling, servicing or using unit. •
Verify all users are properly trained on using the equipment. •
Do not use unit outdoors. •
Verify that each unit is setup, leveled and operated on a solid, level surface. Do not install equipment on •
an uneven surface.
Verify there is enough room for safe access and operation of unit. •
Use Cybex AC power adapters only. •
Do not use the optional power adapter in damp or wet locations. •
Do not use the unit if: (1) the unit is plugged into an optional power adapter that has a damaged cord; •
(2) the unit is not working properly or (3) if the unit has been dropped or damaged. Seek service from a
qualifi ed technician.
EQUIPMENT is not suitable for use in the presence of aerosol (spray), FLAMMABLE ANAESTHETIC •
MIXTURE WITH AIR or WITH OXYGEN or NITROUS OXIDE.
Perform regular maintenance checks on unit. Performance level can be maintained only if examined •
regularly. Pay close attention to all areas most susceptible to wear, including (but not limited to) cables,
pulleys, belts and grips.
Replace any warning labels if damaged, worn or illegible. •
Immediately replace worn or damaged components. If unable to immediately replace worn or damaged •
components, then remove unit from service until repair is made.
Do not attempt repairs; electrical or mechanical. Seek qualifi ed repair technician when servicing. Failure •
to do so could result in serious injury. See Chapter 5 – Customer Service for contact information.
Use only Cybex supplied components to maintain/repair unit. •
Keep a repair log of all maintenance activities. •
Disconnect the optional power adapter before servicing unit. •
Do not use attachments unless recommended for the unit by Cybex. •
The unit may generate electromagnetic or other forms of interference, or it may be affected by •
interference from other equipment nearby. If this is suspected, take precautions by separating the
equipment or otherwise shielding it to avoid such interference.
Unit with A/V Options
Devices connected to Cybex equipment must comply with appropriate safety standards. This includes but •
not limited to: UL 1647 and EN 60335-1.
There must be adequate mechanical mounting of the device in all combinations (confi gurations). •
The device must be stable on the unit in all confi gurations. •