CYBEX 750C, Owner'S Manual

Page: 19 / 84

Assembly and Setup
Page 2–1
Cybex 750C/750R Owner’s Manual
2 - Assembly and Setup
Warnings and Cautions
Read and understand all warnings and cautions listed in Chapter 1 – Safety before assembling unit.
Use extreme caution when assembling the unit. Failure to do so could result in injury or death.
WARNING: Always use proper lifting methods when moving heavy items.
Be sure all electrical requirements are met as indicated in the specifi cations in Chapter 1 – Safety and as
listed in this chapter.
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
Area is well lit and well ventilated.
Surface is structurally sound and properly leveled. Place a 3/4” (1.9 cm) thick wood base under unit to
protect carpeting.)
Area allows for ample access and passage clearance around unit or for emergency dismount. Minimum
clearance is 19.7 inches (.5 meters) on at least one side of unit and also in front of or behind unit.
NOTE: The access and passage clearance dimensions stated are the recommended minimum dimensions
as set forth by the manufacturer. The actual area for access and passage is the responsibility of the
facility and should take into account any required local codes or regulations.
Area is not in the vicinity of high humidity, such as in the vicinity of a steam room, sauna, indoor pool or
outdoors. This unit is designed to function normally in an environment with a relative humidity range of
30% to 75%
.
NOTE: Exposure to extensive water vapor, chlorine and/or bromine could adversely affect the electronics as
well as other parts of the unit.
Area maintains an ambient temperature range of 50
o
F (10
o
C) to 104
o
F (40
o
C) degrees .
Electrical Power Requirements
NOTE: The AC power kit is optional.
Verify the unit is connected to an outlet having the same configuration as the plug.
Verify connection is a grounded circuit. NOTE: Do not use a ground-plug adapter to adapt the 3-prong
power cord to a non-grounded electrical outlet.
NOTE: Use Cybex supplied AC power kit only. Consult an electrician with any questions.
Verify power supply is compliant with local building codes.