CYBEX 620A Owner'S Manual Download Page 48

Page: 48 / 82

Preventive
Maintenance
Page 4-4

Remove the two upper screws securing the

access cover. See Figure 2.

Remove the access cover.

! WARNING: The flywheel may be hot. Wait until it

cools before servicing.

4. Check the condition of each belt.

Roll each belt by pulling down on it. Examine the

condition of each belt. If a belt has cracks or

appears worn, it must be replaced immediately

by a qualified service technician

5. Attach the access cover.

Using a Phillips head screwdriver, tighten the

two upper screws first (removed in step 3B).

NOTE:

Do not over tighten screws.

Tighten the two lower screws, removed in step

3A.

NOTE:

Do not over tighten screws.

See

Figure

6. Test unit for proper operation.

Figure 2

Screw (4)

Access

Cover

Cybex Arc Trainer 620A/629A Owner’s Manual

Summary of Contents for 620A



















































































Search results

Summary of Contents for 620A

Reviews:

Related manuals for 620A

Brands by name

Popular brands

CYBEX 620A, Owner'S Manual

Search results

Summary of Contents for 620A

Reviews:

Related manuals for 620A

Brands by name

Popular brands