22
OPERATION
CONTROL ITEM
DESCRIPTION
Buzzer mute
[YES] [NO]
Clr EPO status
[YES] [NO]
Clear EPO status: once EPO status is enabled, the UPS output would
be cut off. To switch to normal status, EPO connector should be closed
first, and enter “Clr EPO status” to clear EPO status, then UPS would
stop alarm and recover to Bypass model. UPS needs be turned on by
manual operation.
Battery test
[YES] [NO]
User could control all UPS in a parallel system to do the battery test at the
same time.
Single UPS off
[YES] [NO]
When UPS operating in parallel system, user could turn off one of UPS.
Enter SUB-MENU (CONTROL, SETTING, EVENTS, and ID)
1.
Press “ESC” button to enter sub-menu.
2. Press “UP” and “DOWN” buttons to scroll through CONTROL, SETTING, EVENTS, and ID
menu.
3. Press the “ENTER” button to enter to the selected menu.
CONTROL Menu
1.
Select “Control” and press “ENTER” button.
2. Press “UP” and “DOWN” buttons to scroll through the “Control” menu shown in the table
below.
3. Press “ENTER” button to enter the next page.
4. Press “UP” and “DOWN” buttons to scroll through the setting value (yes/no).
5. Press “ENTER” button to confirm the selected setting value and return to the previous
page.
6. Press “ESC” button to return to the sub-menu.
SUB-MENU (CONTROL, SETTING, EVENTS, and ID)
NORMAL
BATTERY
BYPASS
FAULT
ESC