16
UPS SYSTEM STARTUP
Turn on UPS
1.
Check all the connection and DC voltage of battery pack output are correct.
2. Turn on the input breaker, and the fan begins to rotate.
3. "CyberPower" will be shown on LCD screen first.
4. The default UPS status summary will be shown on LCD screen.
5. Press ON/OFF button for at least one second, the buzzer will beep for one second,
UPS starts to turn on. After a few seconds later, the UPS turns into Line Mode.
6. If the mains power is abnormal, the UPS will transfer to Battery Mode.
Turn off UPS
1.
Press ON/OFF button for at least three seconds, the UPS transfers to Standby mode,
and the buzzer will beep for three seconds.
After completing the hardware installation of the UPS, you are now ready to connect the UPS
and connect your equipment.
Attention
•
The UPS could only be turned on while connecting to the mains at the first time.
•
Please switch off the connected loads first before turning on the UPS. Then switch on
the loads one by one after the UPS is turned on.