Cybernetics miSAN-V6, Operator'S Manual

Page: 95 / 190

Operating the Web Control Panel 95
UM-MV-86-B1-0801 Cybernetics
volume tag will allow the virtual tape to appear as if it has been replaced by a new
empty tape in the virtual device.
Copy to another VT : Used to initiate a copy from the virtual tape to another virtual
tape. The destination virtual tape copy will be identical to the source virtual tape,
including the contents and properties, with the exception of the volume tag (the
volume tag will not be copied).
When selected, a box will appear prompting for the destination virtual tape:
After selecting the desired virtual tape and clicking OK, a box will appear asking
for confirmation about overwriting the contents of the destination virtual tape;
click Yes to start the copy.
When the copy begins, the name of the destination virtual tape will be changed to show name
of the source virtual tape inside brackets (e.g., [ VT 1 ]). During the copy, the name of the
destination virtual tape will be followed by an asterisk to indicate the copy is in progress
(e.g., [ VT 1 ] *). The asterisk will disappear after the copy completes.
The “Jobs” tab will show the progress of the copy operation.
Figure 3-50 “Select copy destination” Window
Figure 3-51 “Confirm data overwrite” Window
Note
If the copy is cancelled, the asterisk will be replaced by “incomplete”. In
this case, the destination virtual tape should be erased and renamed.