Product Overview
Starting a Push-to-Talk Session from an IP Phone (Summary)
Operations Guide
931260A
CyberData Corporation
7
1.6 Starting a Push-to-Talk Session from an IP Phone
(Summary)
To start a push-to-talk session from an IP phone:
1. Make sure that the Cisco environment is set it up with the
Intercom
Service
.
2. On the Cisco IP phone, select the
Service
button.
3. Select the
Informacast Intercom Service
.
4. On the Cisco IP phone, dial the extension number for the Speaker that you want to call.
5. When the call from the Cisco IP phone to the Speaker is active, you can do one of the following:
•
Select the
Listen
button on the phone to listen to someone talking into the Speaker.
•
Select the
Talk
button on the phone to talk to someone listening to the Speaker.
Note
The IP phone always controls the talking and listening feature of the Speaker.
6. Select the
Exit
button to terminate the call.
Note
For a more detailed explanation of this procedure with pictures, see
Push-to-Talk Session from an IP Phone (Detailed)"
1.7 Starting a Push-to-Talk Session from a Singlewire
InformaCast Talk-Back Speaker (Summary)
To start a push-to-talk session from a Singlewire InformaCast Talk-Back Speaker:
1. Make sure that the Cisco environment is set it up with the
Intercom
Service
.
2. Press the Remote Call Button to make the Singlewire InformaCast Talk-Back Speaker dial a pre-
programmed IP phone extension.
3. When the call from the Singlewire InformaCast Talk-Back Speaker to the Cisco IP phone is
active, you can do one of the following:
•
Select the
Listen
button on the phone to listen to someone talking into the Speaker.
•
Select the
Talk
button on the phone to talk to someone listening to the Speaker.
Note
The IP phone always controls the talking and listening feature of the Speaker.
4. Select the
Exit
button to terminate the call.
Note
For a more detailed explanation of this procedure with pictures, see
Push-to-Talk Session from a Singlewire InformaCast Talk-Back Speaker (Detailed)"