Setting Up the V2 Paging Server
Configuring the V2 Paging Server
CyberData Corporation
930367H
Operations Guide
25
2.4.8 Configure the Paging Groups (PGROUPS) Parameters
Note
A PGROUP is a way of assigning multicast addresses and port numbers when configuring
multicast paging speakers.
To assign a multicast address, you must first configure the CyberData VoIP speakers that
you want to put into a paging zone by entering a particular multicast address and port
number combination in the web configuration for these speakers.
1. Click on the
PGROUPS Setup
button to open the
PGROUPS Setup
page. See
Figure 2-14
.
Figure 2-14. PGROUPS Setup
