Setting Up the V2 Paging Server
Configuring the V2 Paging Server
CyberData Corporation
930367H
Operations Guide
20
5. On the
SIP Setup
page, enter values for the parameters indicated in
Table 2-8
.
1. Enter the IP address of the
SIP Server
.
2. Enter the port numbers used for SIP signaling:
a. Remote SIP Port
b. Local SIP Port
3. Enter the SIP registration parameters:
a. SIP User ID
Table 2-8. SIP Configuration Parameters
Web Page Item
Description
SIP Settings
SIP Server
Type the SIP server represented as either a numeric IP address
in dotted decimal notation or the fully qualified host name (255
character limit [FQDN]).
Remote SIP Port
Type the
Remote SIP Port
number (default 5060)
(8 character limit).
Local SIP Port
Type the
Local SIP Port
number (default 5060)
(8 character limit).
Outbound Proxy
Type the Outbound Proxy as either a numeric IP address in
dotted decimal notation or the fully qualified host name
(255 character limit [FQDN]).
Outbound Proxy Port
Type the Outbound Proxy Port number (8 character limit).
SIP User ID
Type the
SIP User ID
(up to 64 alphanumeric characters).
Authenticate ID
Type the
Authenticate ID
(up to 64 alphanumeric characters).
Authenticate Password
Type the
Authenticate Password
(up to 64 alphanumeric
characters).
Register with a SIP Server
Enable or disable SIP Registration.
For information about Point-to-Point Configuration, see
2.4.6.1,
"Point-to-Point Configuration"
.
Re-registration Interval (in seconds)
Type the SIP Registration lease time in seconds (default is 60
minutes) (8 character limit). Re-registration Interval (in seconds)
Unregister on Reboot
When selected, on boot, the device will first register with a SIP
server with a expiration delay of 0 seconds. This has the effect
of unregistering any current devices on this extension.
Buffer SIP Calls
When this is enabled, SIP calls to the device will be stored in
memory and will play when either the call is terminated or the
buffer is full. The receive buffer is 2MB in size and this is equal
to about four minutes of ulaw encoded audio.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.
