CUSTOM TRUCK LOAD KING 25-92, Installation Manual

Page: 30 / 171

INSTALLATION
WIRING AND HOSE ROUTING
Before placing the subframe on the
truck's frame rails, it is recommended that
you decide on placement of the six auxiliary
outrigger hoses and wiring. There are typi­
cally two methods of routing these:
1. Draped across the truck frame cross
members. Using large cable ties to
secure them loosely to each cross
member.
2. Routed inside the frame rails and
through each cross member.
The preferred method will depend on the
type of cross members on the chassis, and
clearance between the cross members and
the top of the frame rails.
These hoses may need to be marked on
both ends to make identifying easier during
connection
Page 3 - 6
METHOD 1
METHOD 2
If the second method is used, there is
a possibility of pinching the hoses or wiring
between the subframe and cross mem-
bers. The clearance between the truck
frame cross members and the top of the
frame rails must be greater than the diam-
eter of the largest hose.