CUSTOM TRUCK LOAD KING 25-92, Installation Manual

Page: 115 / 171

7. The lower left and lower right buttons are used to select the number. The number inside the
brackets is the current selection, in the above image, the number 3 is between the brackets.
8. Use the upper left button to enter the numbers, one at a time.
9. When the number is entered, press the upper right button to enter the number into the system
memory. Span of extension is now complete.
10. Press the “Menu Down” button to display “Span No. 3 = xx.xx”.
11. Press the “Span No. 3 = xx.xx” button.
12. Press the “Yes! Calibrate!” button.
13. You will be prompted with the same screen from step 6. Use this screen to enter the span of
angle measurement from the digital level.
14. This calibration routine is now complete. Press the “Exit” button to return to the calibration
menu.