Custom Audio Electronics TK306, User Manual

Page: 73 / 216

AUTO CONTINUE Sets the whether to automatically recover the printer when a memory overflow is displayed.
The waiting time until recovery is 15 seconds:
ON
OFF
D
MANUAL TIMEOUT Sets the time until paper is loaded. Printing cannot be performed unless paper is loaded
within this time:
OFF
30 SEC
60 SEC
D
TIMEOUT INJOB Sets the time, expressed in seconds, until forced printing is performed when print data
stops being received:
OFF 5 10 20 30 40 D
50 60 90 120 150 180
210 240 270 300
TIMEOUT LOCAL Sets the time, expressed in seconds, that the ports are left open when an operation fin-
ishes (excluding the network ports):
from 0 s to 300 s (40 s D)
TIMEOUT NET Sets the time, expressed in seconds, that the network ports are left open when an op-
eration finishes:
from 0 s to 300 s (90 s
D)
JAM RECOVERY Sets whether to print the page where a paper jam occured again. When this is set to OFF,
the remaining pages are not printed, including the page where the paper jam occurred:
ON
D
OFF
ERROR REPORT Sets whether to print an error report when an error occurs in the printer:
ON
D
OFF
HEX DUMP Prints the received data in the hexadecimal dump format.
When the power of the printer is turned off, the printer returns to the regular print mode.
PRINT ADJUST
POSITION ADJUST
X ADJUST Corrects the position of the entire print image in the direction perpendicular to the feed
direction of the paper. Set in increments of 0.25 mm:
from -2.00 mm to 2.00 mm (0.0 mm
D)
73