Custom Audio Electronics PLUS2, User Manual

Page: 52 / 64

7.6
Paper speciication
Linerless thermal paper
LINERLESS paper is a thermal paper with a self-adhesive layer without liner (on non-thermal side). For the better use with
the device the self-adhesive area must comply with the following dimensions:
57 ± 0.5
10
10
THERMAL SIDE
SELF-ADHESIVE
LINERLESS PAPER SPECIFICATIONS
Self-adhesive Water based acrylic
Self-adhesive mass Permanent 16 gr/mq ±2gr
Total thickness
93 μm ±2 μm
Total weight 96 gr/mq ±2gr
Recommended temperature
Stick from +15°C to +40°C
Storage from +10°C to +40°C
Resistance after stick from -10°C to +50°C
WARNING:
Do not set “Print Density” parameter on “Linerless” mode during the device SETUP (see user manual) with common
thermal paper.
In “Linerless” mode, if the device is turned off a few hours, the irst row of the press could be compressed, during the
turning on. It is recommended to perform one or more paper FEED before printing.
52