Custom Audio Electronics PLUS2, User Manual

Page: 35 / 64

USB ADDRESS NUMBER
Numerical address code for the univocal identiication of the USB device (in case of more
than a USB device connected with the same PC):
0 D 3 6 9
1 4 7
2 5 8
PRINT MODE Printing mode:
Normal D = enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
AUTOFEED Setting of the Carriage Return character:
CR disabled = Carriage Return disabled
CR enabled
D = Carriage Return enabled
CHARS / INCH Font selection:
A = 13 cpi, B = 17 cpi D
A = 17 cpi, B = 22 cpi
NOTES:
CPI = Characters Per Inch
COLUMNS 22 CPI Number of columns to use when the 17x22 cpi font is in use (see parameter CHARS /
INCH):
40 columns D
42 columns
NOTES:
The parameter is printed only with PLUS emulation enabled.
To modify the parameter, set the PLUS emulation (see parameter DEVICE EMULATION) and the 17x22cpi
font (see parameter CHARS / INCH):
CODE TABLE [num]
Identiier number of the character code table to use.
The numeric value of the identiier is made up with the following two parameters for the
setting of two digits for the tens and the units:
CODE TABLE [num x 10]
Setting the digit for tens:
0
D
2 4
1 3 5
CODE TABLE [num x 1]
Setting the digit for units:
0
D
2 4 6 8
1 3 5 7 9
NOTES:
See the paragraph 7.7 to learn about the character tables corresponding to the identiication numbers set
with this parameter.
The character tables set with this parameter are the same set with the command 0x1B 0x74 (refer to the
Commands Manual of the device).
35