Custom Audio Electronics KPM862, User Manual

Page: 107 / 152

8.3 Planning of cleaning operations
The regular cleaning of the device keeps the print quality and extends its life.
The following table shows the recommended planning for the cleaning operations. If you use the device in dusty environ-
ments, you must reduce intervals between cleaning operations.
For speciic procedures, see
paragraph 8.4 .
EVERY PAPER CHANGE
Printhead Use isopropyl alcohol
Platen roller Use isopropyl alcohol
CIS reader Use a soft cloth
EVERY 5 PAPER CHANGES
Autocutter Use compressed air
Paper path Use compressed air or tweezers
Sensors Use compressed air
Dual feeder (1) Use compressed air
EVERY 6 MONTHS OR AS NEEDED
Case Use compressed air or a soft cloth
Display
(2)
Use compressed air or a soft cloth
Do not use ammonia-based products
NOTES:
(1) : Only for KPM862 DF, KPM862 DF-EJC, KPM862 DF-hSEL, KPM862 DF-vSEL, TK862 DF, TK862 DF-EJC,
TK862 VR DF, KPM863 DF, KPM863 DF-EJC, KPM863 DF-hSEL and KPM863 DF-vSEL.
(2) : Only for TK862 STD, TK862 EJC, TK862 DF, TK862 DF-EJC, TK862 VR and TK862 VR DF.
107