Custom Audio Electronics KPM862, User Manual

Page: 108 / 152

8.4 Cleaning
For periodic cleaning of the device, see instructions below.
For ease of reference, for some models is represented only the standard model of internal printer group without dual feeder.
Sensors Paper path
Disconnect the power supply cable and
open the device covers (see paragraph 8.1).
Clean all the device sensors
by using compressed air.
Disconnect the power supply cable and
open the upper device cover (see paragraph 5.1).
Clean the area involved in the passage of paper
by using compressed air.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Alcohol, solvent
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Alcohol, solvent
2
1
2
1
Disconnect the power supply cable and
open the device covers (see paragraph 8.1 ).
Disconnect the power supply cable and
open the upper device cover (see paragraph 5.1 ).
108