Custom Audio Electronics KPM862, User Manual

Page: 96 / 152

7.1 Alignment parameters
The “alignment point” is deined as the position inside the ticket to use for the notch/b.mark alignment.
The distance between the notch/b.mark edge and the alignment point is deined as “Cut Distance”.
The value of “Cut Distance” varies from a minimum value of -99.8 mm to a maximum value of 99.8 mm.
If the “Cut Distance” value is set to 0, the alignment point is set at the beginning of the notch/b.mark:
0
-
PRINTING DIRECTION
+
Alignment
point:
notch front
Alignment
point
negative values
of “Cut Distance” positive values
of “Cut Distance”
Alignment
point
For paper with holes, if the “Cut Distance” value is set to 0, the alignment point is set at the center line of the hole:
0
PRINTING DIRECTION
Alignment point
96