Custom Audio Electronics KPM180H, User Manual

Page: 33 / 152

4 INSTALLATION
4.1 Fastening
KPM180H STD, KPM180H STD 300
The device is provided with four ixing holes on the bottom of device (see following igure, dimensions in millimetres). To
fasten the device on a panel, use four M3 screws.
9
0
66 10
4 x M3
A A
It's very important to consider the screws length not to damage the internal components placed near the ixing holes (see
following igure, dimensions in millimetres).
Section A-A
Device chassis
Fixing panel
Fixing screw
1
0
m
a
x
1
0
The screw length (L) will be calculated according to the thickness of the panel (Sp) on which the device is ixed, as follows:
L ≤ 10 mm + Sp
For example, if panel thickness is 10 mm (Sp = 10 mm), the maximum length for screws will be 20 mm.
33