Custom Audio Electronics KPM180H, User Manual

Page: 92 / 152

7.3 Alignment parameters
The “alignment point” is deined as the position inside the ticket to use for the black mark alignment.
The distance between the black mark edge and the alignment point is deined as “Black mark distance”.
Referring to the front of the black mark, the value of “Black mark distance” value varies from -5 mm minimum and 99.9
mm maximum.
If the “Black mark distance” value is set to 0, the alignment point is set at the beginning of the black mark.
0
-
PRINTING DIRECTION
+
Negative values of
“Black mark distance” Positive values of
“Black mark distance”
Alignment
point
Alignment
point
Alignment point:
black mark front
The following igure shows an example of paper with alignment point set by a positive value of “Black mark distance” (“Black
mark distance” = + A):
0
PRINTING DIRECTION
A+
Alignment
point
Black mark
front
92