Custom Audio Electronics KPM180H, User Manual

Page: 113 / 152

Standby consumption
KPM180H STD
TK180 MET
TK180 MET UHF
TK180 PLAS
TK180 PLAS UHF
0.04 A
KPM180H PRES
KPM180H PRES UHF
KPM180H LL
KPM180H LL UHF
TK180 MET PRES
TK180 MET PRES UHF
0.07 A
KPM180H STD 300 0.06 A
ELECTRICAL SPECIFICATIONS POWER SUPPLY code 963GE020000053
(optional for KPM180H STD, KPM180H PRES, KPM180H PRES UHF, KPM180H LL, KPM180H LL UHF
included with TK180 MET, TK180 MET PRES, TK180 MET PRES UHF, TK180 MET UHF, TK180 PLAS, TK180 PLAS UHF)
Power supply voltage from 100 Vac to 240 Vac
Frequency from 50 Hz to 60 Hz
Output 24 V, 2.5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from -10°C to +60°C
Relative humidity (RH) from 10% to 85% (w/o condensation)
Storage temperature from -20 °C to +70 °C
Storage relative humidity (RH) from 10% to 90% (w/o condensation)
NOTES:
(1) : Respecting the regular schedule of cleaning for the device components.
(2) : Damages caused by scratches, ESD and electromigration are excluded.
(3) : “Veramono.ttf” and “Vera.ttf” are installed on the device. It is possible to install additional TrueType fonts by using the
“PrinterSet” software tool available on
www.custom4u.it .
(4) : Referred to a standard CUSTOM receipt (L=10cm, Density = 12.5% dots on).
(5) : For external rolls diameter larger than Ø100mm it’s recommended to use a paper pretensioning device.
(6) : Referred to the UL measurements (Speed/Quality = High Speed, Print density = +50%, Ticket = 12.5% dot on,
1 ticket every 30 s).
113