Custom Audio Electronics KPM180H, User Manual

Page: 77 / 152

USB ADDRESS NUMBER
Numerical address code for the univocal identiication of the USB device (in case of more
than a USB device connected with the same PC).
0 D 2 4 6 8
1 3 5 7 9
USB CLASS
USB communication class deinition.
Printer D = setting the printer function
Mass Storage = setting the sharing mode from Mass Storage
Virtual COM
= setting the USB port as a virtual serial port
To use the value "Virtual COM", it is necessary to install an additional driver (see para-
graph 4.5 )
DHCP CLIENT Setting of the DHCP protocol:
Disabled
D
= protocol disabled
Enabled = protocol enabled
This parameter can be modiied by software (see
paragraph 6.2
) and by ile (see
para-
graph 6.3 ).
IP ADDRESS This is the IP address of device, assigned by the network administrator.
This parameter can be modiied by software (see
paragraph 6.2
) and by ile (see
para-
graph 6.3 ).
SUBNET MASK
This parameter identiies the local network address.
It can be modiied by software (see
paragraph 6.2
) and by ile (see
paragraph 6.3 ).
DEFAULT GATEWAY
This parameter identiies the Gateway IP address used to send applications to the external
network.
It can be modiied by software (see
paragraph 6.2
) and by ile (see
paragraph 6.3 ).
DOMAIN NAME SYSTEM
This parameter identiies the Domain Name System (DNS).
It is not printed on setup report, because it can be modiied only by ile (see
paragraph 6.3 ).
TCP PRINTER PORT This parameter sets the TCP port number.
It is not printed on setup report, because it can be modiied only by ile (see
paragraph 6.3 ).
MAC ADDRESS
This is the number, provided by the constructor, that identiies the device; this number is
univocal.
It can be modiied by software (see
paragraph 6.2
) and by ile (see
paragraph 6.3 ).
ATTENTION:
Any changes to network parameters will interrupt browser connection. If the server not responding you must reconnect
to the new IP address set.
77