Custom Audio Electronics KPM180H, User Manual

Page: 70 / 152

6.2
Coniguration by software
The coniguration parameters can be set by the "PrinterSet” software tool available on
www.custom4u.it . For a detailed
description of operating parameters for the device, see the following paragraphs.
To set the device by software, proceed as follows.
Start “PrinterSet” software tool.
Click on LOAD > FROM DEVICE and select
the device connected to the PC.
From Device
From File
SAVE
PORT
LOAD
Select a configuration file as follows:
Click on LOAD > From file and select a .psc file on your PC
Drag and drop a .psc file
2
3
1
Connect the device to a PC directly (see paragraph 4.3 ),
without using HUB devices.
70