B
WEATHER PROTECTION
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
33
Repair and Service Manual
653045
FLAT WINDSHIELD
Tool List
Quantity
Rubber Mallet .............................................................. 1
Torx Plus Bit, 45 IP ...................................................... 1
Ratchet ........................................................................ 1
Socket, 15mm ............................................................. 1
Torque Wrench, in. lbs. ............................................... 1
1.
Attach the bulb seal (16) to the bottom edge of the
windshield assembly (17).
2.
Carefully tap each windshield sash (18) onto the
windshield. Pay careful attention to the orientation of
each sash.
3.
Install the windshield fastener grommets (19) to the
windshield assembly (17).
4.
Orient the windshield assembly (17). Align each
windshield fastener grommet (19) with the mounting
hole in each strut, and clip the sashes (18) to the
canopy struts.
5.
Insert torx bolts (20) through each windshield fas-
tener grommet (19) and strut leg, secure with lock
nuts (21).
Tighten the hardware to the torque values specified
below.
Figure 2 Flat Windshield
Item
Torque Specification
20
70 - 97 in. lbs. (7.9 - 10.9 Nm)
Canopy Strut
16
17
18
20
19
21
Front of Vehicle
Property of American Airlines
