23
Ed. 0121 - 70702530 REV02 Donatello - Pre-installation CP
Symbols used in the manual and on
the labels applied to the machine
Indicates that caution is required when performing
an operation described in a paragraph that bears this
symbol. The symbol also indicates that maximum
operator awareness is required in order to avoid
unwanted or dangerous consequences
Reference to another chapter where the subject is
dealt with in more detail.
Manufacturer’s tip
Indicates that the surfaces marked with this symbol
may be hot and must therefore be touched carefully
Dangerous voltage
The symbol identifies the terminals which, connect-
ed to each other, carry the various parts of a device
or system to the same potential (not necessarily the
earth potential)
Indicates that it is necessary to read carefully the
paragraph marked with this symbol before installing,
using and maintaining the equipment
Safety instructions
•
Read this guide carefully before installing the
appliance, and keep it with care in an accessible
place for any future consultation by the various
operators.
•
Moreover, the manual must always accompany
the product through its life, even in case of
transfer.
•
Before any movement or installation, check
that the room is suitable and systems comply
with the installation country standards and the
specifications indicated on the appliance rating
plate.
•
All installation, assembly and non-routine
maintenance operations must be performed
exclusively by qualified technicians that are
authorised by the Manufacturer, in compliance
with the regulations in force in the user country,
and with the regulations on systems and work
safety.
•
These appliances are intended to be used
for commercial applications, for example in
restaurant kitchens, canteens, hospitals and
commercial companies such as bakeries,
butcher shops, etc., but not for the continuous
and mass production of food. A use other
than the stated one is considered improper,
potentially dangerous for people and animals
and might permanently damage the appliance.
The improper use of the equipment shall void
the warranty
•
Before performing any maintenance, replacing
components or carrying out any routine/
extraordinary cleaning, disconnect the electricity
supply.
•
Unauthorised actions, tampering or
modifications that do not follow the information
provided in this manual can cause damages,
injuries or fatal accidents and null and void the
warranty.
•
It is forbidden to install the oven in environments
at risk of explosion.
•
Installation or maintenance that fails to comply
with the instructions in this manual may cause
damage, injury or fatal accidents.
•
Persons not involved with the appliance
installation may not pass through or stand in the
work area during appliance assembly.
•
The serial plate provides important technical
information. This is vital in case of a request for
maintenance or repair of the equipment: please
do not remove, damage or modify it.
•
Failure to follow these regulations may cause
damage or even fatal injury, subsequently
invalidating the guarantee and relieving the
Manufacturer of all liability.
3
INSTALLATION
The company cannot be held liable for any print or transcription
errors, reserving the right to make changes where deemed
suitable without prior notice.
Partial reproduction without the Manufacturer's consent
is prohibited. Measurements are purely indicative and not
binding.
The original language used to prepare this manual is English:
the Manufacturer is not responsible for any translation/
interpretation or print errors.
