25
Ed. 0121 - 70702530 REV02 Donatello - Pre-installation CP
Fig. 8
Fig. 9
Kg
lb
1000 mm.
[ 40 in
]
min.
min.
500 mm
[
19,7 in.
]
min.
50 mm
[
1.97 in.
]
min. 50 mm
[
1.97 i
n.
]
min. 50 mm
[
1.97 i
n.
]
min.
50 mm
[
1.97 in.
]
min.
50 mm
[
1.97 in.
]
FOR USA VER-
SIONS ONLY
FOR USA VER-
SIONS ONLY
Positioning
Fig. 8
The positioning room must comply with the instructions
provided on page
4
and
5
. Comply with the
measurements shown in the figure.
Fig. 9
The oven must be placed on a base, built by the Manufacturer
or by yourself that:
•
is flame and heat resistant;
•
is perfectly stable and level;
•
withstands the weight of the appliance.
Model
single
double
Model
single
double
DN435
147 kg - 324 lb
252 kg - 555,5 lb
DN635L
190 kg - 418,8 lb 324 kg - 714,2 lb
DN635
187 kg - 412,2 lb
330 kg - 727,5 lb
DN935
250 kg - 551,1 lb
430 kg - 948 lb
In both cases, silicone the gap between the oven and the sup-
port or the bearing surface, using high temperature resistant
silicone.
The minimum side distance is 50 mm [1.97
in.], However we recommend you leave a
gap of 500 mm [19.7 in.] on the right side*
to make access to the electrical system
easier. If this is not possible, in case of
intervention, it will be necessary to move
the oven from its housing with suitable
systems
