Part No. 4801-5120 Rev. 1-2020
Mega-Cool System
Page 19 of 48
Squeeze and twist splash
guard downward to snap
splash guard into place.
Front View
Install Splash Guards
1.
Insert splash guard into support bracket as shown in diagram at
left.
2.
Press back edge of splash guard against support bracket as
shown and rotate downward into back position.
3.
Use both hands to grip splash guard near midpoint. Squeeze and
rotate splash guard downward until splash guard locks into front
position in the support bracket. Slide Cover to abut to previous
one. NOTE: Cover to be in Closed position before rotation into
Open position.
4.
Use both hands to grip splash guard near midpoint. Squeeze and
rotate splash guard upward until splash guard locks into Open
Option position in the support bracket.
5.
Add a splash guard splice to each joint where two splash guards
abut. Splash guard splice clips over joint. See diagram below.
Splash
Guard
Splice
Insert splash guard into
support bracket
Press back of splash guard
into bracket as shown.
Side View
Splash
guard
Squeeze and twist splash
guard upward to snap
splash guard into place.
Closed Cover
Option
Open Cover
Option
