Part No. 4801-5338 Rev 2-2015
Evolution 4000
50 of 86
Save Program Screens
** SD Card Operations **
Save/Load Programs
Load Program from SD Card
Save Program to SD Card
Update Controller Software Version
Please wait while your SD Card is
accessed.
** Saving Program...
Please wait while your SD Card is
accessed.
** Save Complete. xxxx Values Saved
** Press “Enter” to Return.
** Save Program **
Program # = 0 Program Name = PROGRAM0
Save
Enter the Program
Name to save.
This is the name
associated with the
selected seasonal
program. It will be
used as the file name
to save.
NOTE: If the same file
name already exists
on the SD card, it will
be overwritten.
Select “Save” to
save the data.
Select
Select “Enter” to
return to the SD
Card Operations
Screen.
Choose the
Seasonal Program 0
thru 4 to be Saved.
This is the ACTIVE
seasonal program.
WARNING:
Ensure that the
correct program
number is selected
for the ACTIVE
growout when
finished with SD
card operations.
7.16.2 Save Programs
WARNING:
The following settings are not included as part of the program loaded from the SD card and will
need to be verified: Date, Day, Time, Vent Anticipation (Time before fan starts & Time after
fan starts), and HHNet Address.
The following settings are loaded from the SD Card but should be reviewed to ensure that the
settings are correct for your current setup and livestock age: Tunnel Enabled, Backup Enabled,
& Sensor Setup.
Any time that you load a program, you should verify that all settings are correct. After you
review Sensor Setup (
Refer to Section 7.3
), you will be returned to the Program Setup Screen
(
Refer to Section 6.7
).
NOTE:
The number of Values
Saved is a number
which may vary for
different software
versions. Values
Saved is the specific
number of settings
copied from the
controller.
