Part No. 4801-5338 Rev 2-2015
Evolution 4000
28 of 86
Natural Curtain failed to close.
High Static Pressure due to lack of inlet opening.
NOTE:
Due to the nature of these errors, the control tunnel enable must be reset in order for the
control to re-enter tunnel. Be sure to check the cause if this is a reoccurring problem.
6.7
Program Set-Up
The Program Setup screen is used to select all of the Programming screens. Highlight an entry and press
the ENTER button. See the next section of this manual for a description of the programming screen.
(1) General Settings –
Parameters that usually need to
be set when the system is installed. See
Section 7.1
.
(2) Network Status –
See
Section 0
.
(3) Temperature Sensors –
See
Section 7.3
.
(4) Feed Level Sensors -
See
Section 7.4
.
(5) Ventilation Inlets -
See
Section 7.5
.
(6) Natural Ventilation -
See
Section 7.6
.
(7) Growout Curve -
See
Section 7.7
.
(8) Tunnel Ventilation -
See
Section 7.8
.
(9) On/Off Stages -
Settings for Set up of stages. See
Section 7.9
.
(10) Variable Stage Outputs -
Set-up for variable
stages. See
Section 7.10
.
(11) Stage Properties –
See
Section 7.11
.
(12) Setup Feed Clocks –
See
Section 7.12
.
(13) Setup Light Clocks -
This feature is added for
those applications that desire light control. See
Section 7.13
.
(14) Seasonal Programs & Security –
See
Section
7.14
.
(15) Diagnostics -
See
Section 7.15
.
(16) SD Card Operations -
See
Section 7.16
.
1. General Settings
2. Network Status
3. Temperature Sensors
4. Feed Level Sensors
5. Ventilation Inlets
6. Natural Ventilation
7. Growout Curve
8. Tunnel Ventilation
9. On/Off Stages
10. Variable Stage Outputs
11. Stage Properties
12. Setup Feed Clocks
13. Setup Light Clocks
14. Seasonal Programs & Security
15. Diagnostics
16. SD Card Operations
