www.cuesinc.com
,
4
CUES Inc.
,
Currahee Cutter User Manual | CK902
CUES Inc.
,
Currahee Cutter User Manual | CK902
5
EQUIPMENT OVERVIEW, CONTROLS & SETTINGS
3
ADDITIONAL EQUIPMENT REQUIRED TO OPERATE THE CUTTER SYSTEM (not shown):
A.
Downhole Equipment
(1) Top Manhole Roller Assembly
(1) Invert Roller Assembly
(1) Set of Downhole Poles (6 each)
B.
Air Compressor System
The air compressor system should consist of an air compressor capable of delivering a minimum of 120
psi at 75 cfm. The air compressor can be optioned as an on-board system or can consist of a tow-behind
unit.
C.
Safety and Manhole Entry Gear
Proper safety and manhole entry gear that meets all applicable safety regulations and the user’s confined
space entry permit should always be available at the job site.
D.
Exhaust Blower, 8500 cfm (Optional)
The blower will not only aid in venting the line of potential gases and odors, but will greatly aid in preventing
the accumulation of waste and debris on the camera lens. This will improve the operator’s view of the
cut and reduce the downtime required to clean the camera.
F.
Air/Water Supply System
The supply systems for both air and water consist of high-
quality, dual bonded hoses with a ¾” hose for air and a ¼”
hose for water. An inline regulator/dryer/oiler provides
conditioned air for the cutter. A high-pressure water pump
and supply tank provides water for the cleaning nozzle.
A heavy duty reel with level-wind and free-wheel clutch
holds the hose. Quick disconnect fittings on the ends of
the hoses allow quick attachment to the cutter.
G.
Interchangeable Air Motors
The Currahee Cutter is provided with multiple sizes of air
motors with a standard 3/8-24 thread (Contact CUES
Sales for additional optional cutting heads).
F
G
