CUES CH915 Operation & Maintenance Manual Download Page 85 | Manualshive

Page: 85 / 86

CUES CH915 Operation & Maintenance Manual Download Page 85

CUES Inc.

,

PICS User Manual | CH915

81

www.cuesinc.com

,

| [email protected]

This Record of Revision page is designed to allow the manual user to determine the Engineering/
Manufacturing level to which the manual is written. As engineering changes to the hardware and/
or software are made at CUES, necessary information in the manual will be revised to reflect those
changes. The latest change level and the rationale for any change(s) will be explained in tabular
format on this page to allow the manual user to be better equipped should the need arise to call
CUES regarding technical information.

ORIGINAL MANUAL

REVISION

CHANGE DESCRIPTION

PICS

101516

Initial preliminary release

011917

Updated the manual to current Rev. 07

111417

Updated the manual to include new Sensoray DVR instructions.

011518

Removed the new Sensoray DVR instructions and added
a note to refer to the DVR-USB Operating Appendix, P/N
EC2978-APP, (located at the back of this manual) for
operating instructions.

091520

Various part number changes required for the internal

wireless video transmitter update.

RECORD OF REVISIONS

«
...
83
84
85
86
»

Summary of Contents for CH915























































































Reviews:

No comments