4
54
CUES Inc.
,
PICS User Manual | CH915
www.cuesinc.com
,
OPERATING THE SYSTEM
When the ARROW MODE button is pressed, a blinking arrow is displayed in the middle of the display,
pointing right. This blinking arrow may be moved around using the arrow keys. When an arrow key
is pressed, it will either change the direction of the blinking arrow displayed on the screen, or move
the blinking arrow on the screen one position vertically or horizontally. If the arrow key pressed is
different from the current direction of the blinking arrow displayed, it will change the blinking arrow’s
direction. If the arrow key pressed is the same as the current direction of the blinking arrow displayed
it will move the blinking arrow on the screen one position in that direction.
The blinking arrow on the screen should be positioned to point at the observation desired. Once it is
properly positioned, pressing <ENTER> will cause the blinking arrow to stop blinking and be moved
from the ONSCREEN to the CAMERA display, where it will be recorded (assuming the DVR is on).
• OBSERVATION CODES - press to select and enter observation codes
while recording the inspection.
Selecting a CUES CODE or CUSTOM CODE observation code:
When the operator has made CUES CODES or CUSTOM CODES his observation code type and then
presses the OBSERVATION CODES button, a list of codes is displayed alphabetically with an arrow
pointing at the middle line of the display. The operator may move up and down through the list using
the Up Arrow or Down Arrow keys. However, he may more easily move about the list by pressing the
first character of the desired code and the list will jump to that section of the list (or the nearest letter
prior to that letter).
In the CUES CODES list items that are followed by ‘…’ have a secondary list from which to select.
Moving around the lists is all displayed in the ONSCREEN display, which will not be recorded.
In both the CUES CODES and CUSTOM CODES pressing <ENTER> will select the code (or take
one to the secondary list, at which time pressing <ENTER> again will select the code). When a code
is selected, it is written to the top one or two lines of the CAMERA display which will be recorded
(assuming the DVR is on).
Selecting an OTHER CODES observation code:
When the operator has made OTHER CODES his observation code type and then presses the
OBSERVATION CODES button, a list of codes is displayed alphabetically with an arrow pointing at the
middle line of the display. The operator may move up and down through the list using the Up Arrow
or Down Arrow keys. However, he may more easily move about the list by pressing the first character
of the desired code and the list will jump to that section of the list (or the nearest letter prior to
that letter). If a match is found, that first letter will start blinking. He may continue pressing letters
(second, third, fourth, etc., and the list will further be sorted and the additional matching letters will
start blinking. Pressing <BACKSPACE> will move back a letter and again, re-sort the list based on
what has been selected thus far.