Cubicon Single Operation Manual
(150616,En)
Copyright Reserved HyVISION System Inc. 44 / 44
This document is a general purpose operation manual and is subject to change without notice when necessary
for product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
9. Product Specifications
Dimension
Product size
554x 579 x 524 mm (WxDxH)
Product weight
24 kg
Packaging box
640 x 630 x 610 mm (WxDxH)
Packaged weight
(incl. main body and accessories)
about 33 kg
Temperature
Ambient operating temperature
15 - 35 °C
Storage temperature
0 - 35 °C
Power
AC input
110V ~220V, 50/60Hz, 2.5A@230V/5A@115V
Power supply
24 V DC @ 13A
Power consumption
~ 320W(Max)
Memory and communication
SD Memory card(FAT 32), USB connect cable
Software
Supplied slicing software
Cubicreator
Input 3D design file format
.stl and .obj
Supported OS
Windows XP, Windows 7 + / OSX (Cubicreator v2 +)
Printing
Printing technology
FFF- Fused Filament Fabrication
Printed object size
240 x 190 x 200 mm (WxDxH)
Layer height setting
150~300microns, minimum 100um
Printed wall thickness
Optimal: 400+um with 0.4mm Nozzle
Filament diameter
1.75 mm
Filament type
ABS, PLA Filament
Nozzle diameter
0.4 mm standard
XY position precision
12.5 um
Z position precision
2.5 um
Max. nozzle temperature
260 °C
Max. heating bed temperature
120 °C
- The specifications can be changed, without advance notice, when needed to improve the product.
Information to the User
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radio frequency energy and , if not installed and used in
accordance with the instruction manual, may cause harmful interference area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WARNING
Any changes or modifications not expressly by the manufacturer could void the user
’s authority to
operate the equipment.
