Cubicon Single Operation Manual
(150616,En)
Copyright Reserved HyVISION System Inc. 5 / 44
This document is a general purpose operation manual and is subject to change without notice when necessary
for product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
3. Introduction to Cubicon Single
Operation
What is Cubicon Single?
Cubicon Single is an FFF (Fused Filament Fabrication) type 3D printer that controls the position of an
extruder with an x/y/z axis controlling motor, uses a heating system to melt the filament supplied to the
extruder, pushes the melted filament outside the nozzle with the extruder motor, and constructs a
printed object layer by layer.
Cubicon Single greatly improves print stability by adding user-friendly and innovative functions.
Mounting of Uniquely Designed Detachable Extruder
The most important and key part of an FFF(Fused Filament Fabrication) type printer is the extruder,
which heats and melts the filament and then pushes it out of the nozzle.
Cubicon Single
features our own uniquely designed detachable extruder, the first of its kind in Korea.
Using the detachable extruder maximizes the user friendliness, as the extruder can be easily removed
from the printer for service when the nozzle is plugged. As well, an extruder specific to the filament
being used can be selected to prevent the problems that can arise from using the same extruder for
different types of filament.
The detachable extruder will help create the optimum printing environment.
