| 41
40 |
MTB/ Road Bike/ TRekking
MTB/ Road Bike/ TRekking
When using an electronic derailleur
gear (called di2 by Shimano), the shif-
ting is done by pressing buttons.
The di2 connection is analog.
For further information, please refer
to the specific operating instructions
provided by the manufacturer.
on derailleur systems, the gear is shifted
by switching the chain to another sprocket.
on the crank set, these sprockets are called
"chain rings" and on the rear sprocket
cassette they are called "pinions".
3.
Please observe the chain position
prescribed as shown above.
•
To be avoided:
largest chain ring + largest pinion.
•
Smallest chain ring + smallest pinion.
Shimano EZ Fire
Shimano Rapidfire
Sram Force / Rival / Red
Shimano STI
The STi connection is mechanical.
The left-hand lever operates the chain
ring derailleur and the right-hand lever
operates the gear shift.
Shimano Di2
chain ring
chain
pinion
8.5 adjust rear suspension
(on full suspension bikes)
1.
Please read the instructions for adjusting
your suspension/damper elements in the
suspension fork manufacturer‘s parts
instructions. Please consult your dealer.
2.
adjust your suspension/damper element
so that the bike when carrying the rider‘s
weight deflects equally at the front and
rear wheels.
8.6
Service the gears
Risk of Personal injury and Material
damage!
incorrect operation of the gear shift le-
vers can damage your gears.
•
Never operate both levers or both gear shift
switches at the same time!
•
Please note that for the crank set (left-hand
lever) and hub gears: never shift if there is
a load!
1.
Please determine which gear shift system
your bike has on the basis of the illustra-
tions,. if you are not sure which one it is
please consult your dealer.
2.
if your gear shift lever is not shown in the
illustrations, please refer to the accom-
panying gear shift lever manufacturer‘s
instructions and/or consult your dealer.
Shimano Rapidfire 2-Way-Release_Deore
Shimano Rapidfire 2-Way-Release_XT
Shimano Dual Control
Twist Grip Shift
