Format:
* 84 ABCD M #
ABCD = Extension Number
M=0= Use Single Line Telephone
M=1= Use Key Telephone
Description: Initially enable connect key phone or single line phone with any
extension port of PABX, auto-configure after power ON, dispense
with assignment.
Certain extension port change from Key phone to Single Line phone, require input
* 84 ABCD 0# on Key Phone that connect with 001 port. (001 is un-lock).
Example: PABX Extension port 8008 has used Key Telephone, now, change it to
use Single Line Telephone.
3
*
4
1
1
#
2
8
*
0
8
4
8
0
Pick up 8001(unlock) Input * 84 8008 0 # Du Hang up
#
0 #
#
Format:
* 84 #
All extension ports are disable compatible with Key Phone.
2.6 Extension Port Enable/Disable To Compatible With Key Phone
Key Phone
2.7 Disable Compatible Key Phone For All Extension Ports
15
Section 2 System Programming
Format:
* 3 1 ABCDEFGH #
ABCDEFGH = CO Line ports number = No.1CO line card of DK model = 1 to 8
Description: Assigns which external ( CO ) line is connected to which CO line port.
Example : The port 1, 2,3,4,5 of No.1 CO line card is connected with CO lines, it
is correspond to CO line 1, 2, 3, 4, 5.
2.8 Enable External (CO) Line ( No.1 Co Line Card )
3
*
4
1
1
#
2
3
*
3
1
1
4
2
Pick up 8001(unlock) Input * 31 1 2 3 4 5 # Du Hang up
#
5 #
#
2.9 Disable No.1 CO Line Card
Format
* 31 #
Description: When the No.1 CO line card is not installed or it has not CO line,
please close/disable it to avoid no response when pick up extension.
