37
Section 2 System Programming
Music
Broadcast
Tone- Board
Tape Voice Recorder
RJ11Plug
PC(Tone Card MIC Port) Digital Voice Recorder
Digital
Port
Voice Recorder
* Only record external call, do not react on for internal call.
* Only has one recording route allowed only one extension is being record
at the same time.
Example:
Ext.8013 is being record, mean-while, Ext. 8126 is make external call,
Ext. 8126 will not start to be recorded until Ext. 8013 is hang up.
* Besides use tape recorder or digital voice recorder, we supply PC Record
Software for PABX TC-2000DK and TC-2000VK series.
When use digital voice recorder or PC Record Software, require to connect
it with the Digital Port on the tone board, please refer below chart.
Format:
* 8 3 ABCD #
ABCD = flash time = 100ms to 2000ms
Description:
FLASH means tap the hook-switch fleetly, it is as same as to lifts up
handset apace after hang up. Flash Time is the period since after hang up to re-lift
up handset. If re-lift up handset after assigned flash time, the line will be released.
If re-lift up handset in the assigned flash time, the system will know that the user is
ready to transfer a call, the line will be keep on.
Suppose flash time is 1200ms, if you do not re-lift up handset in 1200ms, the line
will be released; if re-lift up handset after 1200ms, you can dial new number; if
re-lift up handset in 1200ms, you can transfer a call.
Example:
Assign flash time to 1000ms.
2.64 Hook-Switch Flash Time Range
*
0
3
8
1
Pick up 8001(unlock) Input * 83 1000 # Du Hang up
#
0 0
Suggest to assign the flash time to 760ms normally.