CTE PIANOPLAN 600 J SPEEDY STANDARD, Operator'S Maintenance Manual, Page: 5 / 62

Operator’s and Maintenance Manual
Pianoplan 600 J Speedy Standard
CODE
504196
5
Preliminary information :
1. CONTENT OF THE INSTRUCTIONS:
In this manual you will find instructions regarding:
- appropriate use;
- residual risks;
- safety;
- use of the machine;
- routine maintenance;
- dismantling.
These instructions for the use and the maintenance contain important information that
will enable you to use the Pianoplan in a safe and appropriate way. These instructions
are particularly addressed to:
- the personnel employed in the use of the machine;
- the personnel employed in the routine maintenance.
2. MEASURES TO TAKE IMMEDIATELY:
Before starting to use the machine, carefully read these instructions, respecting all the
information and particularly the ones regarding the safety.
3. MEASURES TO TAKE IN CASE OF RE-SALE:
If you sell your Pianoplan, it is obligatory to hand over this manual, the maintenance
register and the list of the spare parts to the buyer. In case of loss, please ask for a
new/replacement manual from the supplier.
4. USE AND RETENTION OF THE MANUAL:
This manual is addressed to the following persons:
- the user of the machine;
- the supervisor of the working area;
- the person in charge of the transport of the equipment;
- the person in charge of the maintenance of the machine;
- the person in charge of the final dismantling.
A copy of the manual is supplied with the machine and must always be together with the
machine in order to consult it rapidly and in a precise way.
In the case you loose or damage this important document, contact immediately our Spare
Parts Department.
This manual must be considered as an integral part of the machine and must follow the
machine throughout its entire working life.
CTE S.p.A., Pianoplan manufacturer, reserves the right to update either the production
or the manuals, without any obligation of communication. The present manual reflects
the technical state of the product as of date of manual and is drawn up in compliance
with the EC Directive 98/37 (Machine Directive), attachment I, paragraph 1.7.4.