CTE PIANOPLAN 600 J SPEEDY STANDARD, Operator'S Maintenance Manual, Page: 27 / 62

Operator’s and Maintenance Manual
Pianoplan 600J Speedy Standard
CODE
504196
27
ATTENTION : otherwise the Pianoplan could turn over.
•
Lift slowly the Pianoplan pushing the control button for the roller lifting system (Fig.
4.2 Pos. 13) .
•
Check the correct balance of the load.
•
Lift again the Pianoplan some centimetres pushing the control button for the roller lifting
system
(Fig. 4.2 Pos. 13) and bring it up flush to the next step.
•
Proceed as indicated in the paragraph
“Manoeuvre of stairs climbing”
Par. 6.1.
Narrow space:
These are the most difficult and delicate conditions. You must control different factors
taking into consideration the ratio between the area where you have to manoeuvre and the
load being transported.
Considering these factors, you will avoid damage from contact of the load or by the
Pianoplan hitting the landing wall.
To that end, you must work following this procedure:
•
Be sure that the dimensions of the landing are sufficient to make the necessary
manoeuvres, making good use of the characteristic of the machine.
ATTENTION : in these conditions, during the manoeuvre, you must
continuously check the location of the wheels of the lifting system (the
semicircular decals which are placed on the side of the machine), and be
sure that these wheels are completely on the landing. Otherwise, the
machine could fall down the top stair, with serious consequences.
•
Lift the Pianoplan some centimetres moving the control button for the roller lifting
system
(Fig. 4.2 Pos. 13) enough to put it obliquely close to the first steps, putting down
the tracks ( Fig. 6.3 Pos. c-d ).
•
Put the Pianoplan perpendicular to the stairs and slowly retract the lifting system (Fig.
4.2 Pos. 13). Move the proportional control (Fig. 4.2 Pos. 1) to execute the climbing of the
stair.
ATTENTION : when you work in this condition, it is very important to
check that the load is not damaged against the wall of the stairs.
•
Complete the climbing manoeuvre following the same procedures as in the previous
points.